Freshtel и модемы Sagem f@st 9520 Seowon SWU-3220A

Везёт вам!
а у нас тут в Москоляндии всё прикрыли и теперь впаривают дурацкий 4G с кривыми IP лимитированными безлимитами и в 10 раз дороже чем было в WiMax

ну так у нас тоже оно лимитировано стало то что было безлимитно - так везде, хотя есть ночные безлимиты еще

модем как-то заработал потом, думаю после перезагрузки, но все равно не стабильно - он как-то внутри отваливается а "драйвер" не переконнекчивается

в общем решилось покупкой роутера по дешевке на slando - там можно за 50$ найти иногда, интересно что роутер zte лучше ловит чем sagem модем

Hi

I am getting this error when trying to connect to my WIMAX operator:

onnecting to BSID: 00:00:80:01:02:a4
Start Authentication.
EAP: EAP entering state IDLE
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=57 method=1 vendor=0 vendorMethod=0
EAP: EAP entering state IDENTITY
CTRL-EVENT-EAP-STARTED EAP authentication started
EAP: EAP-Request Identity data - hexdump_ascii(len=0):
EAP: using anonymous identity - hexdump_ascii(len=23):
30 30 32 31 30 37 31 44 30 30 31 43 40 6f 6c 6f 0021071D001C@olo
2e 63 6f 6d 2e 70 65 .com.pe
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=1 method=13 vendor=0 vendorMethod=0
EAP: EAP entering state GET_METHOD
CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=13
EAP: Initialize selected EAP method: vendor 0 method 13 (TLS)
EAP-TLS: Private key not configured
EAP: Failed to initialize EAP method: vendor 0 method 13 (TLS)
EAP: Building EAP-Nak (requested type 13 vendor=0 method=0 not allowed)
EAP: allowed methods - hexdump(len=0):
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAP: EAP entering state RECEIVED
EAP: Received EAP-Failure
EAP: EAP entering state FAILURE
CTRL-EVENT-EAP-FAILURE EAP authentication failed
Authentication Failed. Renewing Authentication.
Error connecting to BSID: 00:00:80:01:02:a4

what is wrong?
I really need help!
thanks

kurczaq wrote: ...
EAP-TLS: Private key not configured
...

Hi, please email your *.conf file to leyarx[at]gmail.com and I'll try to solve your problem.

P.S. before sending change your password to something like ***

hi

sent you an email

hello
sorry for my english is bad
I have Seowon 3220A
i'm installed new connection manager for seowon two day ago
when i used it prompt "Do You Want Update?"
i clicked yes
after a minute my modem turned off
and now not turning on
when i connect it to pc in device manager no device be find or visable
and in linux with command lsusb it can't find my device
i think it need chip reprograming
i searched internet for finding flash tool for jtag it but i cant find

If May Help Me Please!!!